Join Free or Sign in
Shopping Cart 0
$0.00

PicoBoo Plus Controller + Pneumatic Kit: 3/4" Bore Cylinder

SKU
HB-1AUH
In stock
Everything you need to start controlling pneumatics today!

From $256.87

To $424.90

Customize PicoBoo Plus Controller + Pneumatic Kit: 3/4" Bore Cylinder
Your Customization
PicoBoo Plus Controller + Pneumatic Kit: 3/4" Bore Cylinder

In stock

$256.87

Summary
    This kit contains everything you need to start controlling pneumatics today -
    PicoBoo Plus Starter Kit + Pneumatic Hookup Kit + Cylinder of your choice!

    Includes:

    PicoBoo Plus Starter Kit

    • 1x PicoBoo Plus Four Output Controller
    • 1x Speaker with 15 feet of wire
    • 1x Audio Recording Cable
    • 1x Optional choice of trigger with 15 feet of wire
    Pneumatic Hookup Starter Kit
    • 1x Solenoid Valve (5-Ported 4-Way 12VDC with 1/8" ports)
    • 2x Elbow Fittings (1/8" Threads x 1/4" Airline)
    • 3x Male Fittings (1/8" Threads x 1/4" Airline)
    • 2x Exhaust Mufflers (1/8" Threads)
    • 20 feet of 1/4" Airline
    Your Choice of Pneumatic Cylinder (3/4" Bore)
    • This determines how far the shaft extends. Some of the most popular stoke sizes are 2, 6, and 12.
    Write Your Own Review
    You're reviewing:PicoBoo Plus Controller + Pneumatic Kit: 3/4" Bore Cylinder
    Your Rating
    Customer Questions
    Will the PicoBoo control and power 24V DC devices?

    It will control them but it does not supply 24VDC power to the devices. You would need a separate 24V power supply. Click here for wiring information.

    Scare sound only plays for 2 seconds

    The scare sound will only play as long as the animation. Record longer animation.

    What is the max pneumatic weight for the PicoBoo Plus Controller + Pneumatic Kit?

    The cylinder can handle about 40 pounds maximum force.

    Can these be battery powered?

    The PicoBoo and BooBox controllers can run off of a 12V battery. We recommend one with high amperage such as a car, motor cycle, or alarm system battery.

    Will this controller run servos?

    This controller does not support servos. The products that do are the BooBox Flex MAX and the PicoTalk.

    Can I use a 12V DC 10 Amp power supply with this controller?

    Yes, as long as the power supply is 12V DC and at least 1Amp. You can never have too many amps, but never supply more voltage!

    Is the PicoBoo power supply included?

    Yes, the appropriate 12V 1Amp power supply is included with this kit.

    Is there a way to delay the sound starting, say for a few seconds, once the trigger is activated?

    The way to do this is to record some silence into the beginning of your audio file.

    How do I make it continuously play without having to trigger it?

    Simply connect a short jumper wire between (-) and (IN) and it will play the program continuously.

    I would like to have a 10 second pause between triggered events.

    Record the sequence on the PicoBoo but wait 10 seconds before tapping record to save. That will add 10 seconds of “post delay” during which time a sensor will not be able to activate the PicoBoo.

    Can a reed switch be used as a trigger?

    Yes. Most reed switches are normally-closed, so depending on your application you might have to set the trigger mode on the PicoBoo to normally-closed too. Either way it will work.

    Can I record audio into the controllers via my Android or iPhone?

    Yes.

    Can I run a PicoBoo from a battery?

    Yes, you can run them from a 12V battery. More information can be found here

    There are currently no specific videos for this product. Visit our YouTube channel for many great videos.
    For assistance with this product visit the Support & Training Center or Contact Us