The Gantom DMX Spot is a 4W color controllable LED spotlight for professional applications. Featuring a non-linear dimming curve, the Gantom DMX Spot can be dimmed with high precision even at the lowest intensity levels. Homogeneous optics smoothly blend the colors of the internal quad chip LED producing a clean projected field without the “halos” seen in many other color mixing fixtures. High frequency hybrid modulation allows the Gantom DMX Spot to be used in video applications with minimal on-camera flickering. The Gantom DMX Spot can even be battery powered for portable applications, perfect for event lighting where access to power and signal is inconvenient. The Gantom DMX Spot is configured using our DMX Programmer iOS app, available free from the Apple App Store.

Features

• Homogeneous narrow beam optics
• Available in dynamic white, RGBW, cool white, and warm white configurations
• Also available in wide beam angle configuration (see Gantom DMX Flood)
• Non-linear dimming curve for smooth fading without visible “steps” in output intensity
• 14 bit dimming compressed into single 8 bit channel gives precision control without using extra channels
• Flicker free for video applications
• DMX address and colors stored in memory via DMX Programmer app
• Less than 5W at full output
• Integrated DMX receiver
• Integrated quad channel constant current driver for consistent output
• Indoor and outdoor use

Applications

• Themed entertainment (dark rides, Halloween attractions, bars, nightclubs, casinos)
• Theatre and stage accent lighting
• Mobile displays
• Floral centerpieces
• Retail spaces
• Architectural accent lighting
• General purpose accent lighting
• Props and animatronics
• Special effects lighting
• Temporary event lighting

Specifications

Max Wattage	4.8W
LED Wattage	4 x 1W
Input Voltage	9-15VDC (12VDC nominal)
Current Draw	< 400mA @ 12VDC
Power Supply	for use with class 2 transformer or battery
Beam Angle	19 degrees
Field Angle	38 degrees
Ingress Protection	IP65
LED	Cree XLamp MC-E
Certifications	UL and CE
Power Connector	2.1mm DC jack with screw terminal adapter
Signal Connector	3.5mm (1/8″) TRS jack with screw terminal adapter