How Do You Create a Looping Program With Your Controllers?
Any of our controllers can be set to loop a recorded program. How you do this depends on which controller you are using.
For controller like the PicoBoo ONE, PicoBoo JR and PicoBoo you can record your desired aniation as the triggered show and then "loop" the trigger input by connecting the "IN" to the "-" terminal on the trigger input.
Some controllers, like the PicoBoo MP3, BooBox Flex and BooBox FlexMax are capable of recording ambient animation and do not need to have their trigger input looped. If you are using Director you can select to program your animation in the Idle Scene. Sound and animation here will loop whenever the controller is powered on and is not being triggered. To switch to programming for the Idle scene follow the steps below:
At the top center of director you will find the Scene Selection menu. Click here and select the "Idle" scene to program sound an animation for the Idle Scene.
You can also select to program for the Idle Scene via the buttons on a PicoBoo MP3 (see the manual for more info on this) or by using a ScareMaster with a BooBox.
