Join Free or Sign in

Shopping Cart 0
$0.00
Categories
Search

Wireless Trigger (4-Relay)

SKU
HB-1ABP
In stock
Remotely trigger up to FOUR devices.

As low as $29.99

Customize Wireless Trigger (4-Relay)
Your Customization
Wireless Trigger (4-Relay)
Wireless Trigger (4-Relay)

In stock

$29.99

Add to Wish List
Summary
    Add to Wish List
    Be the first to review this product
    Loading...

    The module has four relays (7 amps max per) on screw down terminal blocks. PicoBoos, BooBoxs, lights, or any other device that can be triggered from a relay can now be activated wirelessly. Use with all FrightProps controllers and audio players or your own devices with trigger input. Package Includes:

     

    • 1 x Control Switch Board with four 7-amp relays on it
    • 1 x Remote Control with four buttons

    Requires a 12VDC Power Supply. If you are powering from another device (such as a PicoBoo) then you will not require one.

    Features:
    • Working Voltage: DC12V
    • Output voltage: Decided By the COM PIN INPUT
    • Loop current limit:5A
    • Idle Current: 5mA
    • Working Frequency: 433Mhz
    • Receiving Sensitivity: -104dBm
    • Function option: Momentary/Toggle/Latched
     
     
    Pin functions:
    +V: Positive pole input
    GND: Negative pole input
    1 - Normal Closed of Relay 1   
    2 - KC1 Common of Relay 1         
    3 - KC1 Normal Open of Relay 1    
    4 - KC3 Normal Closed of Relay 2
    5 - KC3 Common of Relay 2              
    6 - KC3 Normal Open of Relay 2     
    7 - KC2 Normal Closed of Relay 3       
    8 -  KC2 Common of Relay 3             
    9 - KC2 Normal Open of Relay 3    
    10 - KC4 Normal Closed of Relay 4     
    11 - KC4 Common of Relay 4              
    12 - KC4 Normal Open of Relay 4        

    Please Note:

        • Actual antenna range will vary greatly depending on the installation and operating environment

    Programming:

    When you receive the product, it maybe set in one remote mode randomly, that is because each unit is tested at the factory.So, if you want to select the remote mode you like, please delete the existing data as described below:

    Press the learning key on the Receiver Switch Module board 8 times, then wait for the LED indicator on the board flash 7 times, this will reset the mode of the remote.

    How to set the remote mode:
     
     
    1 - Momentary:
     
    Press the learning key on the Receiver Switch Module board once. The on-board LED indicator will flash. Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that momentary mode was set successfuly.
     
    2 - Toggle:
     
    Press the learning key on the Receiver Switch Module board 2 times. The on-board LED indicator will flash.Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that toggle mode was set successfuly.
     
    3 - Latched:
     
    Press the learning key on the Receiver Switch Module board 3 times. The onboard LED indicator will flash.
    Then press any remote key (i.e.: A) followed by a second key (i.e.: B), the on-board LED indicator will flash 3 times to inform that latched mode was set successfuly. The first pressed key will be ON and the second pressed key will be OFF.
     
     
    4 - Relays 1 and 2 Momentary / Relays 3 and 4 Toggle:
     
    Press the learning key on the Receiver Switch Module board 4 times. The onboard Led indicator will flash.
    Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that this mode was set successfuly.
     
     
    5 - Relays 1 and 2 Momentary / Relays 3 and 4 Latched:
     
    Press the learning key on the Receiver Switch Module board 5 times. The onboard Led indicator will flash.
    Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that this mode was set successfuly.
     
     
    6 - Relays 1 and 2 Toggle / Relays 3 and 4 Latched
     
    Press the learning key on the Receiver Switch Module board 6 times. The onboard Led indicator will flash.
    Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that this mode was set successfuly.
     
     
    7 - Relays 1 and 2 Latched / Relays 3 and 4 Latched: 
     
    Press the learning key on the Receiver Switch Module board 7 times. The onboard Led indicator will flash.
    Then press any key on the remote, the on-board LED indicator will flash 3 times to inform that this mode was set successfuly.
     
    Write Your Own Review
    You're reviewing:Wireless Trigger (4-Relay)
    Your Rating
    Customer Questions
    With this wireless controller, do the buttons on transmitter act as off/on switch or momentary?

    The wireless unit is user configurable for momentary, latching, and signal interlock.

    • Momentary: The relay activates when the button is pressed and deactivates when released.
    • Latched: When button is pressed the relay stays on until the button is pressed again.
    • Signal Interlock: Flip flops between relays. For example: press A and relay A stays on even if A  is pressed again. Press B and then relay A turns off and B stays on. Then button B does  nothing until button A is pressed. And so on.

    Do the wireless triggers have to be "line of sight" to activate?

    The wireless triggers work the farthest when there are no obstructions. But they do work through walls and such, just not as far.

    Are these waterproof, can it be out in the rain?

    These are not waterproof and must be protected from all moisture.

    Does the wireless remote for the flash cracker use the same frequency as the four channel remote?

    They use the same frequency (315Mhz) and they will conflict with each other as they each use the same communication protocol.

    What kind of battery used in the remote and can it be replaced?

    The battery is a “23A” and is replaceable.

    Product Video

    For assistance with this product visit the Support & Training Center or Contact Us